Send an Email
1800 810 6547
All Entries Tagged With: "Installation"
Installation of openQRM
Preparing Network: Install “bridge-utils” # sudo apt-get install bridge-utils Now edit /etc/network/interfaces and setup a bridge using a static, private ip-address. #cat /etc/network/interfaces auto lo iface lo inet loopback auto br0 iface br0 inet static address 192.168.3.251 netmask 255.255.255.0 gateway 192.168.3.1 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off #sudo /etc/init.d/networking restart #brctl [...]
Installation of openQRM using KVM
Preparing Network: Install “bridge-utils” # sudo apt-get install bridge-utils Now edit /etc/network/interfaces and setup a bridge using a static, private ip-address. #cat /etc/network/interfaces auto lo iface lo inet loopback auto br0 iface br0 inet static address 192.168.3.251 netmask 255.255.255.0 gateway 192.168.3.1 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off #sudo /etc/init.d/networking restart #brctl [...]
